Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-412003.png)
11. Apply liquid gasket to the block mating surface of the oil pump, then install it on the engine block.
NOTE:
^
Do not apply liquid gasket to O-ring grooves.
^
Apply a light coat of oil to the crankshaft and to the lip of seal.
^
Use new O-rings and apply oil when installing them.
12. Install the oil screen.
13. Apply liquid gasket on the oil pump and right side cover mating areas as shown below.
14. Install the oil pan gasket and oil pan.
