honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Blower Motor|Removal and Installation|Page 5537 > < Blower Motor|Removal and Installation
Page 2
background image

Blower Unit Replacement

WITH AIR CONDITIONING

2-b.  Remove the evaporator.

3.  Disconnect the connectors from the blower motor, resistor, and recirculation control motor.

Blower Unit Replacement

4.  Remove the wire harness holder from the recirculation control motor and release the wire harness from the clamp on the blower unit.

Remove the two bolts, nut and blower unit.

5.  Install the removed parts in the reverse order of removal, and make sure there are no air leaks.

Blower Motor|Removal and Installation|Page 5537 > < Blower Motor|Removal and Installation