Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-1030001.png)
Ignition Coil: Testing and Inspection
1. With the ignition switch OFF, remove the distributor ignition (DI) cap.
Ignition Coil Test
2. Remove the two screws to disconnect the BLK/YEL and WHT/BLU wires from the terminals A (+) and B (-) respectively.
3. Using an ohmmeter, measure resistance between the terminals. Replace the coil if the resistance is not within specifications.
NOTE: Resistance will vary with the coil temperature; specifications are at 68°F (20°C).
Ignition Coil Test
Primary Winding Resistance
(between the A and B terminals): 0.63 - 0.77 ohms
Secondary Winding Resistance
(between the A and secondary winding terminals): 12,800 - 19,200 ohms
