Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-29001.png)
Hazard Flasher Relay: Testing and Inspection
Turn Signal/Hazard Relay Input Test
CAUTION:
^ All SRS wire harnesses are covered with yellow insulation. Before you disconnect any part of an SRS wire harness, disconnect the airbag
connectors.
^ Whenever the ignition switch is ON (II), or has been turned OFF for less than three minutes, be careful not to bump the SRS unit; the airbags
could accidentally deploy and cause damage or injuries.
^ For additional precautions, refer to the Air Bags and Seat belts.
1. Remove the driver's side kick panel, then disconnect the 6P connector from the turn signal/hazard relay.
Turn Signal/Hazard Relay Input Test
