Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
Turn Signal/Hazard Relay Input Test
2. Inspect the connector and socket terminals to be sure they are all making good contact.
^ If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
^ If the terminals look OK, make the following input tests at the connector terminals.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all input tests prove OK, the turn signal/hazard relay must be faulty; replace it.