Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
18. Install the inlet joint on the pump housing.
FLOW CONTROL VALVE INSTALLATION
1. Apply steering grease (Honda P/N 08733-B070E) to new O-rings.
2. Coat the flow control valve with clean power steering fluid.
3. Install the flow control valve, spring and control valve cover on the pump housing.
4. Tighten the three control cover bolts.
PULLEY INSTALLATION
1. Hold the steering pump in a vise with soft jaws.
CAUTION: Be careful not to damage the pump housing with the jaws of the vise.
2. Install the pump pulley as shown, then install the pulley nut.