honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Removal and Replacement Strut|Page 5392 > < Removal and Replacement Strut|Page 5390
Page 6
background image

REMOVAL 

1. Remove the rear wheels and place them in the trunk for ballast.
2. Remove the rear seat lining.

3. Remove the two flange nuts.

4. Remove the wheel sensor wire bracket.

NOTE:  Do not disconnect the wheel sensor connector.

5. Remove the damper mounting bolt.
6. Remove the flange bolt that connects the lower arm to the trailing arm.

Removal and Replacement Strut|Page 5392 > < Removal and Replacement Strut|Page 5390