Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
Wheel Bearing: Service and Repair
Front Suspension
TOOL REQUIRED
-
07JAF-SH20110 Wheel Hub Dis/Assembly Pilot, 38 mm
-
07JAF-SH20120 Wheel Hub Dis/Assembly Shaft, 22.4 x 25.4 mm
-
07749-0010000 Driver
-
07746-0010500 Attachment, 62 x 68 mm
-
07GAF-SE00401 Wheel Hub Dis/Assembly Base
NOTE: Replace the bearing with a new one after removal.
1. Remove knuckle. Refer to Steering and Suspension.
2. Separate the wheel hub from the knuckle using the special tools, and a hydraulic press as shown.
CAUTION:
-
Take care not to distort the splash guard.
-
Hold onto the wheel hub to keep it from falling when pressed clear.
-
To prevent damage to the tool make sure the threads are fully engaged before pressing.
3. Remove the circlip and the splash guard from the knuckle.