honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Key Interlock Solenoid Test|Page 4168 > < Shift Interlock Solenoid|Locations
Page 1
background image

Shift Interlock Solenoid: Testing and Inspection
Key Interlock Solenoid Test

1.  Remove the dashboard lower cover and knee bolster.

Key Interlock Solenoid Test

2.  Disconnect the 7-P connector from the main wire harness.
3.  Check for continuity between the terminals in each switch position according to the table.

Key Interlock Solenoid Test

4.  Check that the key cannot be removed when battery power and ground are connected to the A and B terminals.

If the key cannot be removed, the key interlock solenoid is OK.

If the key can be removed, replace the steering lock assembly (the key interlock solenoid is not available separately).

Key Interlock Solenoid Test|Page 4168 > < Shift Interlock Solenoid|Locations