Del Sol Si VTEC L4-1590cc 16L DOHC MFI (1997) Clutch, M/T Pressure Plate Specs
6. Inspect for warpage using a straight edge and feeler gauge.
NOTE: Measure across the pressure plate at three points.
-
Standard (New): 0.03 mm (0.001 inch) max.
-
Service Limit: 0.15 mm (0.006 inch)
-
If the warpage is more than the service limit, replace the pressure plate.
INSTALLATION
1. Install the ring gear holder.
2. Install the clutch disc using the special tools.
NOTE: Use only Super High Temp Urea Grease (P/N 08798 - 9002).
3. Install the pressure plate.