Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-1159003.png)
6. Press a new wheel bearing into the wheel hub using the special tools, and a press as shown.
CAUTION: Place the wheel bearing on the knuckle with the pack seal [metal color) towards the inside. Be careful not to damage the sleeve of
the pack seal.
7. Install the circlip securely in the knuckle groove.
8. Install the splash guard and tighten the screws.
9. Install the wheel hub on the knuckle using the special tools and a hydraulic press as shown.
CAUTION:
-
Take care not to distort the splash guard.
-
To prevent damage to the tool make sure the threads are fully engaged before pressing.
