Element 2WD L4-2.4L (2003)
52. Measure voltage between ECM/PCM connector terminal E7 and body ground.
Is there battery voltage?
YES - Go to step 57.
NO - Go to step 53.
53. Turn the ignition switch OFF.
54. Remove the glove box, then remove the PGM-FI main relay 1 (A) from the under-hood fuse/relay box.
55. Measure voltage between PGM-FI main relay 1 4P connector terminal No.4 and body ground.
Is there battery voltage?
YES - Go to step 56.
NO - Repair open in the wire between the No.6 ECU (ECM/PCM) (15A) fuse and PGM-FI main relay 1.
