Element 4WD L4-2.4L (2004)
Low Beam Relay: Testing and Inspection
Power Relays Test
Use this chart to identify the type of relay, then do the test listed for it.
NOTE: The turn signal/hazard relay input test.
Five-terminal type:
Low Beam Cut Relay (Canada)
Check for continuity between the terminals.
-
There should be continuity between the No. 1 and No. 2 terminals when power and ground are connected to the No. 3 and No. 4 terminals.
-
There should be no continuity between the No. 1 and No. 4 terminals when power is disconnected.