Element 4WD L4-2.4L (2004)
Coolant: Service and Repair
Replacement
1. Start the engine. Set the heater temperature control dial to maximum heat, then turn off the ignition switch. Make sure the engine and radiator are
cool to the touch.
2. Remove the radiator cap.
3. Loosen the drain plug (A), and drain the coolant.
4. After the coolant has drained, tighten the radiator drain plug.
5. Remove, drain and reinstall the reverse tank.
6. Fill the reserve tank to the MAX mark (A) with Honda All Season Antifreeze/Coolant Type 2 (P/N OL999-9001).
7. Pour Honda All Season Antifreeze/Coolant Type 2 into the radiator up to the base of the filler neck.