Fit L4-1.5L (2008)
Antenna Amplifier: Service and Repair
AM/FM Antenna Lead/Amplifier Replacement
SRS components are located in this area. Review the SRS component locations.
Also review the precautions and procedures before doing repairs of service.
1. Remove the headliner.
2. Remove the AM/FM antenna.
3. Disconnect AM/FM antenna lead/amplifier 3P connector (A) and detach the clips (B), then remove the AM/FM antenna lead/amplifier (C).
NOTE: The AM/FM antenna lead and washer tube are joined together with adhesive tape.
4. Install the AM/FM antenna lead/amplifier in the reverse order of removal.
