honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Cowl Moulding / Trim > < Trunk / Liftgate Weatherstrip|Service and Repair
Page 1
background image

Body Emblem: Service and Repair

Emblem/Sticker Replacement

NOTE:  When removing the emblem/sticker, take care not to scratch the body.

1. To remove the front "H" emblem, remove the front grille.
2. To remove the rear "H" emblem, remove the rear license trim.
3. Clean the body surface with a sponge dampened in alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
4. Apply the emblems/sticker where shown. When installing the LEV sticker on the inside surface of the left quarter glass, align the sticker with the

edge of the glass mark as shown, then press the sticker into place, and remove the application tape.

5. After installing the front "H" emblem, reinstall the front grille.

6. After installing the rear "H" emblem, reinstall the rear license trim.

Cowl Moulding / Trim > < Trunk / Liftgate Weatherstrip|Service and Repair