honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Relays and Modules - Starting and Charging > < Airbag Handling and Storage|Page 553
Page 3
background image

8. Connect the SRS main harness 18P connector to the SRS unit, then push it into position until it clicks.
9. Install the heater lower covers on the center console.

10. Remove and properly store the short connectors, then reconnect the airbag connectors (and reinstall the access panel and the dashboard

compartment).

11. Reconnect the battery positive cable, then the negative cable.
12. After installing the SRS unit, confirm proper system operation: Turn the ignition switch ON (II); the instrument panel SRS indicator light should

come on for about six seconds and then go off.

13. Enter the anti-theft code for the radio, then enter the customer's radio station presets.

Relays and Modules - Starting and Charging > < Airbag Handling and Storage|Page 553