honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Clockspring Assembly / Spiral Cable, Air Bag > < Airbag Handling and Storage|Page 8268
Page 3
background image

8. Connect the SRS main harness 18P connector to the SRS unit, then push it into position until it clicks.
9. Install the heater lower covers on the center console.

10. Remove and properly store the short connectors, then reconnect the airbag connectors (and reinstall the access panel and the dashboard

compartment).

11. Reconnect the battery positive cable, then the negative cable.
12. After installing the SRS unit, confirm proper system operation: Turn the ignition switch ON (II); the instrument panel SRS indicator light should

come on for about six seconds and then go off.

13. Enter the anti-theft code for the radio, then enter the customer's radio station presets.

Clockspring Assembly / Spiral Cable, Air Bag > < Airbag Handling and Storage|Page 8268