Odyssey L4-2.2L SOHC (1995)
Air Bag(s) Arming and Disarming: Service Precautions
Wiring Precautions
-
Never attempt to modify, splice or repair SRS wiring.
NOTE: SRS wiring can be identified by special yellow outer protective covering.
-
Be sure to install the harness wires so that they are not pinched or interfering with other car parts.
-
Make sure all SRS ground locations are clean and grounds are securely fastened for optimum metal-to-metal contact. Poor grounding can cause
intermittent problems that are difficult to diagnose.
Disconnecting the SRS Connector at the Under-dash Fuse/Relay Box:
CAUTION: Avoid breaking the connector; it's double-locked.
1. First lift the connector lid with a thin screwdriver, then press the connector tab down, and pull the connector out.