Odyssey L4-2.2L SOHC (1995)
9. Grease all the sliding surfaces of the regulator where shown.
NOTE:
^
If necessary, remove the power window motor from the regulator.
^
Before removing the power window motor, scribe a line across the sector gear and regulator.
10. If the power window motor was removed, install it on the regulator. Check that the regulator moves smoothly by connecting a 12 V battery to the
power window motor.
11. Install the front lower channel, center lower channel and glass run channel.
NOTE: Fit the glass run channel into the front lower channel and center lower channel, and on the door as shown.