honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Sliding Door Junction Switch Test (Power Sliding Doors)|Page 7448 > < Sliding Door Junction Switch Test (Power Sliding Doors)|Page 7446
Page 2
background image

2. Disconnect the 12P connector (A) from the junction switch (B).

3. Check for continuity between the terminals according to the table.
4. If the continuity is not as specified, replace the switch.

Door Side (Without Factory Security System)

Door Side (Without Factory Security System):

1. Remove the left sliding door panel.

Sliding Door Junction Switch Test (Power Sliding Doors)|Page 7448 > < Sliding Door Junction Switch Test (Power Sliding Doors)|Page 7446