Odyssey V6-3.5L (2003)
Trunk / Liftgate Latch: Service and Repair
Tailgate Latch Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the tailgate trim panel.
2. Disconnect the handle cable (A), cylinder rod (B), lock rod (C) and tailgate latch switch connector (D), and detach the connector.
3. Remove the bolts, then pull the tailgate latch (E) out.
4. Disconnect the tailgate latch actuator connector (F), then remove the tailgate latch.
5. Install the latch in the reverse order of removal, and note these items:
-
Make sure the connectors are plugged in properly and the each rod is connected properly.
-
Make sure the cable actuates the latch before you close the tailgate.
-
Make sure the tailgate opens properly and locks securely.
