Odyssey V6-3.5L (2003)
Trim Panel: Service and Repair
Trim Removal/Installation - Rear Side Lower Area
Trim Removal/Installation - Rear Side Lower Area
NOTE:
-
Put on gloves to protect your hands.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
-
Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown.
-
To remove the rear side trim panel, remove the speaker grille and rear speaker.
-
When removing the side trim panels, be sure to remove the mounting screws behind the rear speakers.
-
Be sure to disconnect the rear accessory socket and brake light failure sensor connectors when removing the left rear trim panel.
2. Install the trim in the reverse order of removal, and note these items:
-
Replace any damaged clips.
-
Push the clips into place securely.
-
Apply liquid thread lock to the anchor bolts before reinstallation.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the seat belts.