Odyssey V6-3.5L (2003)
Air Bag(s) Arming and Disarming: Service and Repair
Connector Disconnection / Connection
Disconnecting System Connectors
Turn the ignition switch OFF, and disconnect the negative cable from the battery, and wait at least 3 minutes before beginning the following procedures.
-
Before disconnecting the left side wire harness 2P connector (F), disconnect the driver's seat belt tensioner 2P connector (G).
-
Before disconnecting the right side wire harness 2P connector (H), disconnect the front passenger's seat belt tensioner 2P connector (I).
1. Turn the ignition switch OFF. Disconnect the battery negative cable, and wait at least 3 minutes
Driver's Airbag
2. Remove the access panel from the steering wheel, then disconnect the driver's airbag 4P connector (A) from the cable reel 4P connector (B)
Front Passenger's Airbag