Odyssey V6-3.5L (2003)
6.
Install the new PCM in the reverse order of removal. Torque the mounting nut and the mounting bolt to 12 N.m (8.7 lb-ft).
7.
Reinstall the center console covers and the carpet.
8.
Use the HDS to upload the immobilizer system transponder codes to the new PCM:
^
Refer to REPLACING THE ECM/PCM in S/B 00-049, Immobilizer System (Type 2), or
^
Online, enter the keyword IMMOBI, and select Immobilizer System (Type 2) from the list.
9.
Do the idle learn procedure:
^
Make sure all electrical items (A/C, audio unit, defogger, lights, etc.) are off.
^
Start the engine, and let it reach normal operating temperature (cooling fans cycle twice).
^
Let the engine idle with the throttle closed for 10 minutes.
Disclaimer
