Odyssey V6-3.5L (2003)
1. Place the new front passenger's weight sensors on the seat riser. Tighten the mounting nuts (A) from the backside and connect the sensor
connectors to the front passenger's weight sensor unit. Then install the harness clips.
2. Install the seat riser and the seat assembly.
3. Reconnect the battery negative cable.
4. Calibrate the front passenger's weight sensor unit.
5. After installing the front passenger's weight sensors, confirm proper system operation: Turn the ignition switch ON (II): the SRS indicator should
come on for about 6 seconds and then go off.