Odyssey V6-3.5L (2003)
2. Disconnect the connector (A) from the actuator.
3. Check for continuity between the E3 and E4 terminals in each switch position.
-
There should be continuity with the knob switch in UNLOCK.
-
There should be no continuity with the knob switch in LOCK.
4. If the continuity is not as specified, replace the switch.
Tailgate Knob Switch Test
Tailgate Knob Switch Test
1. Remove the tailgate trim panel.
2. Disconnect the 3P connector (A) from the actuator (B).
3. Check for continuity between the 2 and 3 terminals in each switch position.
-
There should be continuity with the knob switch in UNLOCK.
-
There should be no continuity with the knob switch in LOCK.
4. If the continuity is not as specified, replace the switch.
Radio Remote Switch Test
Radio Remote Switch Test