honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

All Other Service Bulletins for Steering Column Bearing: > < Audio System - Remote Controls Don't Work Properly|Page 5755
Page 12
background image

26.

Do the idle learn procedure.

^

Make sure all electrical items are turned off, then start the engine.

^

Let the engine reach its normal operating temperature (the cooling fan cycles twice).

^

Let the engine idle (throttle fully closed and with all electrical items off) for 10 minutes.

27.

Initialize the driver's window auto-up feature.

^

Turn the ignition switch to ON (II).

^

Make sure the driver's window is fully closed.

^

Push down and hold the window switch. Make sure the window goes all the way down.

^

Pull back and hold the window switch. Make sure the window goes all the way up, then hold the switch for at least 2 more seconds.

28.

Enter the anti-theft code for the radio, and then enter your customer's radio presets.

29.

Reset the clock.

30.

Confirm that the steering wheel controls operate properly:

^

When you turn the ignition switch to ON (II), the SRS indicators come on for about 6 seconds and then go off.

^

Make sure the horn works properly.

^

Make sure the remote audio controls work properly.

^

Make sure the turn signals work properly

Disclaimer

All Other Service Bulletins for Steering Column Bearing: > < Audio System - Remote Controls Don't Work Properly|Page 5755