Odyssey EX L4-2156cc 2.2L SOHC MFI (F22B6) (1997)
6. Tighten each bolt two turns at a time in the sequence shown below to ensure that the rockers do not bind on the valves.
^
Specified torque:
-
8 mm bolts: 22 Nm (16 ft. lbs.)
-
6 mm bolts: 12 Nm (107 in. lbs.)
7. Install the back cover.
8. Install the key and the camshaft pulley onto the camshaft, then tighten the retaining bolt to 37 Nm (27 ft. lbs.).