Odyssey EX L4-2156cc 2.2L SOHC MFI (F22B6) (1997)
/Page-551001.png)
Crankshaft: Service and Repair
Removal
1. Remove the right side cover.
2. Remove the Crankshaft Position/Top Dead Center (CKP/TDC) sensors, then remove the timing belt drive pulley.
3. Remove the balancer gear case.
4. Remove the front balancer driven pulley as shown.
5. Align the bolt hole and the balancer shaft hole, then insert a 6 x 100 mm bolt to hold the rear balancer shaft.
