honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Headlamp Dimmer Relay > < Hazard Warning Switch|Testing and Inspection|Page 7711
Page 1
background image

Headlamp Bulb: Service and Repair

CAUTION:

^

Halogen headlights become very hot in use; do not touch them or the attaching hardware immediately after they have been turned off.

^

Do not try to replace or clean the headlights with the lights on.

^

Do not touch the glass of the halogen bulbs.

Headlights Bulb Replacement

1. Disconnect the 3P connector from the headlight.

Left headlight: Remove the washer filler assembly. 
Right headlight: Remove the air intake cover.

2. Remove the rubber cap.
3. Pull the retaining spring away from the bulb, then remove the bulb.
4. After replacement, adjust the headlight to local requirements.

Headlamp Dimmer Relay > < Hazard Warning Switch|Testing and Inspection|Page 7711