Odyssey EX L4-2253cc 2.3L SOHC (VTEC) MFI (1998)
Seat Belt: Service and Repair
Front Seat Belt
CAUTION: Check the front seat belts for damage, and replace then if necessary. Be careful not to damage then during removal and installation.
Front seat belt removal:
1. Remove the front and rear door sill moldings.
2. Slide the front seat forward fully.
3. Remove the upper anchor cover, and pull the lower anchor cover back.
4. With a 17 mm socket or box-end wrench, remove the upper anchor bolt and lower anchor bolt.
5. Remove the center pillar upper trim.
6. Remove the shoulder anchor adjuster.
7. Remove the center pillar lower trim.