Odyssey EX L4-2253cc 2.3L SOHC (VTEC) MFI (1998)
4. Attach a hose to the end of the valve as shown.
5. Submerge the valve in a container of power steering fluid or solvent, and blow in the hose. If air bubbles leak through the valve at less than 98
kPa (14.2 psi), repair it.
If the flow control valve tests OK, reinstall it in the pump. If the flow control valve still leaks air, replace the pump as an assembly. The flow
control valve is not available separately.
Ball Bearing:
1. Inspect the ball bearing by rotating the outer race slowly. If any play or roughness is felt, replace the ball bearing.
2. Remove and discard the ball bearing using a press as shown.