Odyssey EX V6-3.5L (1999)
![background image](/honda/odyssey_ex/v6-3.5l/Page-2639001.png)
Lower Sliding Door Roller: Service and Repair
Sliding Door Lower Roller Lever Replacement
Power Sliding Door
1. For EX and EX-L models: Disable the power sliding doors by turning off the main switch.
2. Remove the nuts, then loosen the cable adjusting nuts (A) and disconnect the lower roller lever cable (B) from the lower roller lever (C). Take care
not to bend the cable.
3. Install the lower roller lever in the reverse order of removal, and note these items:
-
Make sure the lower roller cable is connected properly.
-
With the door fully open, make sure the power sliding door handle switch (D) makes a clicking sound as soon as the inner or outer door handle
is pulled. If necessary, adjust the cable adjusting nuts.
-
Check the sliding door operation. Make sure the sliding door operates properly when the outside handle is pulled (sliding door in the open
position; the sliding door closes fully).
Manual Sliding Door
1. Remove the nuts, then loosen the cable adjusting nuts (A) and disconnect the lower roller latch cable (B) from the lower roller latch (C). Take care
not to bend the cable.
2. Install the lower roller latch in the reverse order of removal, and note these items:
-
Make sure the lower roller latch cable is connected properly.
-
Make sure the door locks and opens properly. If necessary, adjust the lower roller lever cable adjusting nuts.