Odyssey EX V6-3.5L (1999)
16.
Reinstall the inside door handle.
17.
Reinstall the front and rear upper trim pieces.
18.
Repeat this repair procedure on the other door.
19.
Center-punch a completion mark above the first character (2) of the engine compartment VIN.
Repair Procedure B (EX Only)
1.
Use a trim pad remover to unclip the front and rear upper trim pieces. Unhook the trim pieces at the bottom and remove them. Do not bend or
crease the trim pieces during removal.
2.
Use a wire hook to remove the clip from the inside door handle. Remove the door handle.
3.
Pry out the cap behind the door handle, then remove the screw. Use the trim pad remover to unclip and remove the inside door panel. Do not bend
or crease the door panel during removal.