Odyssey EX V6-3.5L (1999)
License Plate Frame: Service and Repair
Rear License Trim Replacement
NOTE:
-
Take care not to scratch the tailgate.
-
Put on gloves to protect your hands.
1. Remove the tailgate lower trim panel.
2. From inside the tailgate, disconnect the rear license light subharness connector (A), and detach it from the tailgate. With navigation system:
Disconnect the rear camera unit connector (B), and detach it from the tailgate. Remove the bolts securing the rear license molding and rear license
trim.
3. Remove the rear license trim (A).
1. Open the tailgate.
2. From inside the tailgate, detach the clips (B, C).
3. Gently close the tailgate.
4. Release the harness grommet (D) from the body, then pull out the rear license light subharness (E).