Odyssey EX V6-3.5L (1999)
![background image](/honda/odyssey_ex/v6-3.5l/Page-2878003.png)
8. Lift and pull out the release buttons (A), and remove the screws (B), then remove all the headrest guide (C, D).
9. Remove the seat-back cover (E).
10. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing all the clips and
fasteners ('02-04 models leather seat).
-
Replace the any clips you removed with new ones.
Seat Cushion Cover
1. Separate the seat-back and seat cushion.
2. Remove these items:
-
Cushion latch cover.
-
Cushion latch lever trim.
3. Remove the screws, then remove the grab handle (A) from the cushion frame.