Odyssey EX V6-3.5L (1999)
![background image](/honda/odyssey_ex/v6-3.5l/Page-2917005.png)
2. Disconnect the 4P connector from the release motor and switch.
3. Test the release motor by connecting power and ground according to the table.
4. Check for continuity between the terminals in each switch position according to the table.
5. If the actuator does not operate as specified or the continuity is not as specified, replace the unit.
Tailgate Knob Switch Test
Tailgate Knob Switch Test
1. Remove the tailgate trim panel.