Odyssey EX V6-3.5L (1999)
Trunk / Liftgate Weatherstrip: Service and Repair
Tailgate Weatherstrip Replacement
1. Remove the tailgate weatherstrip (A) by pulling out on it.
2. Apply clear sealant (B) into the channel of the tailgate weatherstrip all the way around.
Sealant: Cemedine P/N 08712-0004, or equivalent
3. Locate the painted alignment mark (C) on the tailgate weatherstrip. Align the painted mark with the alignment tab in the center of the tailgate
opening, and install the tailgate weatherstrip all the way around in the direction shown. Make sure there are no wrinkles in the weatherstrip.
4. Check for water leaks.