honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Symptom Related Diagnostic Procedures|Page 3104 > < Symptom Related Diagnostic Procedures|Page 3102
Page 11
background image

13. Turn the ignition switch ON (II).

14. Measure the voltage between the No.2 terminal of the rear blower motor high relay 4P connector and body ground.

Is there battery voltage?

YES-Go to step 15.

NO-Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the rear blower motor high relay.

15. Turn the ignition switch OFF.

16. Disconnect the rear heater-A/C main switch 10P connector and the rear heater-A/C passenger's control panel 10P connector.

17. Check for continuity between the No. 4terminal of the rear blower motor high relay 4P connector and the No.9 terminal of the rear heater-A/C

main switch 10P connector, and between the No.4 terminal of the rear blower motor high relay 4P connector and the No. 4 terminal of the rear
heater- A/C passenger's control panel 10P connector.

Is there continuity?

YES-Go to step 18.

Symptom Related Diagnostic Procedures|Page 3104 > < Symptom Related Diagnostic Procedures|Page 3102