Odyssey EX V6-3.5L (1999)
5. Measure the voltage between the No.2 terminal of the rear mode control motor 7P connector and body ground.
Is there battery voltage?
YES-Go to step 6.
NO-Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the rear mode control motor.
6. Turn the ignition switch OFF.
7. Check for continuity between the No.1 terminal of the rear mode control motor 7P connector and body ground.
Is there continuity?
YES-Go to step 8.
NO-Check for an open in the wire between the rear mode control motor and body ground. If the wire is OK, check for ground at G582.
8. Test the rear mode control motor. Is the rear mode control motor OK?
YES-Go to step 11.
NO-Go to step 9.
9. Remove the rear mode control motor.
10. Check the rear mode control linkage and doors for smooth movement.
Do the rear mode control linkage and doors move smoothly?
YES-Replace the rear mode control motor.
NO-Repair the rear mode control linkage or doors.
11. Remove the rear mode control relay, and test it.
Is the relay OK?
YES-Go to step 12.
NO-Replace the rear mode control motor relay.
12. Turn the ignition switch ON (II).