Odyssey EX V6-3.5L (1999)
-
The backs of some connectors are packed with dielectric grease. Add grease if necessary. If the grease is contaminated, replace it.
-
Insert the connector all the way and make sure it is securely locked.
-
Position wires so that the open end of the cover faces down.
Handling Wires and Harnesses
-
Secure wires and wire harnesses to the frame with their respective wire ties at the designated locations.
-
Remove clips carefully; don't damage their locks (A).
-
Slip pliers (A) under the clip base and through the hole at an angle, then squeeze the expansion tabs to release the clip.
-
After installing harness clips, make sure the harness doesn't interfere with any moving parts.
-
Keep wire harnesses away from exhaust pipes and other hot parts, from sharp edges of brackets and holes, and from exposed screws and bolts.