Odyssey EX V6-3.5L (1999)
Keyless Entry Module: Testing and Inspection
Power Door Locks/Factory Keyless/Factory Security
Control Unit Input Test
1. Before testing the keyless entry/power door lock control functions, troubleshoot the multiplex control system.
Driver's multiplex Control Unit:
2. Remove the driver's multiplex control unit from the driver's under-dash fuse/relay box.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.
