Odyssey EX V6-3.5L (1999)
31. Disconnect the SRS main harness 3P connector (A) from the dashboard wire harness (B).
32. Check resistance between the No.6 terminal of the SRS main harness 18P connector and No.1 terminal of the SRS main harness 3P connector;
there should be 0 - 1.0 ohm.
Is the resistance as specified?
YES - Open in the BLU wire of the dashboard wire harness; repair the dashboard wire harness.
NO - Open in the SRS main harness; replace the SRS main harness.
