Odyssey EX V6-3.5L (1999)
46. Grease the sliding surface of the rack guide (A), and install it onto the gearbox housing.
47. Apply new sealant to around the first three threads of the rack guide screw (B), then install the spring (C), rack guide screw and locknut (D).
48. Adjust the rack guide screw. After adjusting, check that the rack moves smoothly by sliding it right and left.
49. Install the stop washer (A) and the lock washer (B) on the rack (C). Align the lock washer tabs (D) with the slots (E) in the rack. Install the rack
end (F) while holding with lock washer in place. Repeat this step for the other side of the rack.
50. Hold the flat surface sections of the right side steering rack with a wrench, and tighten the both rack ends. Be careful not to damage the rack
surface with the wrench.
51. Bend the lock washer back against the flat spots on the rack end joint housing.
