Passport 2WD V6-3.2L SOHC (6VD1) (1995)
Exhaust Manifold: Service and Repair
1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Disconnect battery ground cable, then insulate cable end with suitable electrical tape.
3. If removing left manifold, remove EGR pipe.
4. Disconnect front exhaust pipe from manifold.
5. Remove five heat protector retaining bolts, then the heat protector.
6. Remove seven exhaust manifold retaining nuts, then the manifold.
7. Reverse procedure to install.
8. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.