Passport 2WD V6-3.2L SOHC (6VD1) (1995)
/Page-66001.png)
Air Bag Control Module: Service and Repair
1. Disarm SRS as outlined under Technician Safety Information.
2. Remove Powertrain Control Module (PCM) cover cap and cover, then disconnect harness connectors.
3. Remove PCM unit with three bolts.
4. Disconnect sensor connector, remove three bolts, then remove sensor from vehicle.
5. Reverse procedure to install. Tighten attaching screws to specifications.
6. Arm SRS as outlined under Technician Safety Information.
