Passport 2WD V6-3.2L SOHC (6VD1) (1995)
Wiper Relay: Testing and Inspection
Rear Wiper Relay
95 1/2 Model
Fig. 58 Rear Wiper Relay
1. Using suitable ohmmeter, ensure continuity exists between terminals No. 1 and 2, Fig. 58.
2. Continuity should not exist between terminals No. 3 and 4.
3. Apply battery voltage between terminals No. 5 and 6, then test continuity.
4. Continuity should not be indicated between terminals 1 and 2.
5. Continuity should exist between terminals 3 and 4.
6. If continuity is not as indicated, replace relay.