Passport EX 2WD V6-3.2L SOHC (6VD1) (1997)
Muffler: Service and Repair
Exhaust Pipe and Muffler Replacement
NOTE:
-
Remove battery negative cable.
-
Raise the vehicle and support with suitable safety stands.
REMOVAL
1. Exhaust Silencer fixing nuts
-
Disconnect exhaust silencer at three way catalytic converter.
2. Exhaust Silencer fixing nuts
-
Disconnect exhaust silencer at rear exhaust pipe.
3. Exhaust Silencer.
INSTALLATION
To install follow the removal steps in the reverse order.
-
Tighten muffler fixing nuts at chassis side to 16 Nm (12 ft. lbs.).
-
Tighten muffler fixing bolts 43 Nm (32 ft. lbs.).