Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Rear Door Exterior Handle: Service and Repair
Rear Outside Handle And Associated Parts
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel.
3. Peel the upper half of the waterproof sheet.
-
Taking notice of the door harness, peel the waterproof sheet off the door panel carefully.
4. Disconnect the locking link and remove fixing bolts to remove the outside handle.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. Check that the outside handle operates smoothly.
2. Tighten the outside handle fixing bolts to the specified torque.
Torque: 9 N.m (78 lb in)